EASYSeal Natural Stone Intensifier

High performance colour enhancer to restore all natural stone

EASYSeal Natural Stone Intensifier
  • High performance, non-gloss wet look stone enhancer
  • Excellent water resistance
  • Instant & stone uniform colour enhancement
  • Long lasting stain resistance
  • Overcoatable
  • 1 litre covers up to 30m2 based on one coat, depending on surface porosity

FIND YOUR NEAREST STOCKIST

Installation

Guide

DO NOT DILUTE – USE NEAT AS SUPPLIED

Shake container well before each use.

Step 1: Transfer and Apply

Transfer to a suitable container and apply a thin but even coat with a paint pad to one paver at a time, finishing the application at the joint (if applied to joints some enhancement may occur).

Step 2: Wait

Let the product sit on the surface for a few minutes to allow better absorption.

Step 3: Apply a second application

Apply a second application as per step 1.

Step 4: Buff

Using a dry, absorbent cloth, buff the paving surface reducing shine as you go. Failure to do so may result in a slippery surface when wet.

Step 5: Finish

Optimum performance is reached after 7 days. Once an application has been applied do not walk or drive on the coated area for at least 24 hours after application or until fully dry. Allow product to cure for at least 24 hours before subjecting to heavy use – increase this time in cold, damp conditions.