EASY TileAlign
The quick and easy solution for ensuring a perfectly level patio.
Fit – Spin – Snap. EASYTileAlign is quick and convenient. It is suitable for traditional tile installation methods, or for use with Azpects revolutionary EASYClickBase system.
Smooth, Even Surface. EASYTileAlign ensures that a smooth, even surface is achieved on calibrated, ceramic, or porcelain tiles.
Easy to Use and Reusable. EASYTileAlign is an easy to use levelling system that incorporates a tile spacer and levelling cap, plus optional protective shields. After use, the screw caps and shields can be reused from job to job.
EASYTileAlign
New Look
The popular tile levelling system is getting a new look with bright, attractive new colours. The new system is manufactured exclusively in the UK, and components, including the packaging, can be fully recycled. 2023 saw an introduction of a new 7mm tile spacer, perfect for some natural stone paving and those who prefer a wider joint for aesthetic reasons.
Levelling Caps
3mm
5mm
7mm
Installation
Guide
Step 1: Spacer
Insert threaded spacer posts beneath each exposed tile edge, ensuring direct contact between the spacer posts and tile, with no adhesive mortar in between. Spacer positions will vary depending on tile size.
Step 2: Install
Install the adjacent tile tightly against the already inserted spacer posts.
Step 3: Bed the tile
Slide the tile back and forth or use a rubber mallet to bed the tile into the adhesive/mortar while releasing trapped air underneath.
Step 4: Level
Spin the EASYTileAlign levelling cap on the spacer posts and tighten it to achieve a level surface across the joint.
Top Tip! For sensitive paving, use our Anti Friction shields to prevent scratching.
* Caps and shields can be reused.
Step 5: Removal
After the mortar is cured, Loosen the caps and snap off spacers in the direction of the joint.
Frequently Asked
Questions
Leave the cap on, slightly loosen by half a turn then hit or kick the cap in the direction of the joint.
The different colours identify the spacer sizes.
The shields prevent the caps from marking slip resistant and smooth surfaces.
Use on any tile up to 35mm thick.
Yes, snapped spacers can be used as just spacers but not adjusters.
This is because the amount of lippage is too significant, and the force being exerted is too much..
Products Available
| Product | Size |
|---|---|
| EASYTileAlign Levelling Caps | 50pc |
| EASYTileAlign Spacer Posts (Blue) | 150pc – 1/8″ (3mm) |
| EASYTileAlign Spacer Posts (Yellow) | 150pc – 3/16″ (5mm) |
| EASYTileAlign Spacer Posts (Orange) | 150pc – 1/4″ (7mm) |
| EASYTileAlign Anti Friction Shields | 100pc |
