6 Legal Disclaimers 1. User’s Responsibility. The company cannot be aware of all the applications and materials the product may be used with. It is the user’s responsibility to determine suitability for use. If used in accordance with the instructions, the product should set hard and not affect the aesthetic properties of the material on which it is used, but no guarantee of this is given or implied. Neither the manufacturer nor supplier accepts any liability for; (a) the joint failing as a result of inherent site conditions, (b) any changes in the appearance of the paving resulting from the use of EASYJoint or (c) any visual or physical changes to the joint, whether naturally occurring or from the application of any other substance, such as cleaning products or protection coats. If in any doubt, test a sample before use. Refer to the Azpects website for more precautionary advice. 2. Color. EASYJoint is a natural product and shades can vary - please refer to page 1 for further information on colours. It is strongly advised that you purchase enough product to complete your project, ensuring that the batch numbers match. The color will also change with natural weathering. 3. Marking on Paving. If incorrectly used with insufficient water to create a barrier between the paving and the EASYJoint using the wet application method, or with particularly sensitive stone if it has not been protected with an appropriate sealer before jointing, marking and discoloration may occur. This can be prevented by using the correct installation methods as described in these instructions and elsewhere in Azpects literature and on the Azpects website. However, should this occur (subject to variables such as the type of paving material, degree of marking, weather conditions, etc.), such marking should fade and disappear. 4. Final Warning about the Base and Site Conditions. EASYJoint must be used on a porous base. For this reason, EASYJoint is not suitable for use in overlay installations. For this type of application, we recommend the use of EASYJoint PRO. If an impermeable base (such as concrete) and/or a strongly mixed bedding mortar (greater than 5:1) is used, then, over time, the EASYJoint may fail. No responsibility is taken by the manufacturer or supplier for such an occurrence. In addition, pay particular attention to the guidelines herein for open graded base conditions. Health & Safety • Keep out of reach of children. • Avoid breathing dust, mist. • Wear protective gloves/protective clothing/eye protection/face protection. • Do not get in eyes, on skin, or on clothing. • IF IN EYES: Rinse immediately with plenty of water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention. • IF ON SKIN: Wash with plenty of soap and water. If skin irritation occurs get medical advice/attention.
RkJQdWJsaXNoZXIy NDUxNTk=