EASYCare Grout Residue Cleaner

Quickly remove grout haze

EASYCare Grout Residue Cleaner
  • Easy-to-use with no fumes
  • Suitable for interior and exterior use
  • Pleasant fragrance
  • Ready-to-use
  • Perfect for removing EASYGrout residue
  • 1 litre cleans up to 40m2

FIND YOUR NEAREST STOCKIST

Grout Residue Cleaner can be used on glazed and unglazed ceramic tiles, including any acid-resistant surface. Mild acid replacements and surfactants work together to dissolve and emulsify hard to remove grout and mortar residues leaving the surface bright and film free.

Installation

Guide

Step 1: Shake

Shake well before use.

Step 2: Dilute

Light contamination: 1 dose (100ml) in 1 litre of clean water.

Heavy contamination: 3 does (300ml) in 1 litre of clean water.

Top Tip! For heavy contamination older than 24 hours, apply neat from the bottle.

Step 3: Apply

Apply directly using a garden sprayer or a watering can fitted with a fine rose attachment.

Step 4: Agitate

Agitate the surface of the paving with a stiff brush or coarse tilers’ sponge and leave to act for 10 minutes. Do not allow the surface to dry out.

Step 5: Finish

Rinse thoroughly with clean water using a hose or power washer.

 

Grout Residue Cleaner is for use on porcelain. Avoid use on any natural stone.

Leave the product on to work for at least 10 minutes. After this time, a second application may be required.

A second application will be required if the product has been left on too long and dried.